A range of options is available for Raman analysis, including systems suitable for handheld, laboratory and educational applications. Systems typically include a spectrometer, laser, operating software and sampling accessories, while modular options are available for users to configure their own Raman systems. Most applications are handled in the 150-3200 cm-1 range, with resolution of ~6-10 cm-1.

Introduction
Raman spectroscopy offers a number of benefits for testing and characterization. It is rapid and non-destructive, requires only limited sample preparation and allows for sample volumes in the microliter range. In addition, Raman can be used to measure aqueous samples or samples with high moisture content, and allows researchers to capture data from a sample contained in plastic or other materials that are optically transparent to the wavelengths of interest.

Raman is particularly useful for pharmaceutical applications. For example, Raman techniques are used to discern characteristics of pharmaceutical raw materials, including active ingredients, binders, fillers, lubricants and other excipients. Raman is also useful for through-container measurements of pharmaceutical blister packs, pill bottles and vials.

Experimental Conditions
To illustrate the capabilities of our Raman systems we analyzed Paracetamol (acetaminophen) and Carbamazepine, which are pharmaceutical active ingredients, and the excipients alpha and beta lactose. The samples studied consisted of simple organic compounds contained in standard, clear borosilicate scintillation vials. No additional preparation was necessary.

Samples were analyzed using a modular Raman setup comprising our QE65000 Spectrometer, a 785 nm laser with 500 mW output and a fiber optic probe. The spectrometer was set from ~780-940 nm and configured with a 50 µm slit for good optical resolution. High reflectivity optical bench mirrors increased spectrometer sensitivity.

To collect signal, we placed the tip of the probe at the bottom of three glass vials containing the samples. We measured the samples at an integration time of 8 seconds and averaged three spectra.

Results
Our measurements confirmed that this Raman configuration can differentiate various pharmaceutical raw materials based on their spectral fingerprints. Also, the experiment helped demonstrate that, with proper method development and application of chemometric analysis, our Raman setups can be used to obtain semi-quantitative data of active ingredients in a pharmaceutical mixture.

Our experiment also showed that fluorescence occurs in the lactose samples. Fluorescence is a common phenomenon in Raman measurements of some organic compounds and depends on the wavelength of the laser utilized.

Conclusions
The availability of both turnkey and modular Raman systems, complemented by sophisticated chemometric analysis packages and spectral libraries, makes Raman spectroscopy a versatile choice for a host of applications.

Setup

Components for Oxygen:
NeoFox Phase Fluorometer
RedEye® Oxygen Patches (Headspace and In-Solution measurement)
Bifurcated Fiber Optic probe (more…)

Goal:
Assess the feasibility of using LIBS system to characterize elements in microprocessor coating and core (more…)

Goal:

To measure oxygen concentration is measured in the headspace of organic solvents such as Acetonitrile) using a phase fluorometer system (more…)

Goal:
To acquire elemental analysis data for a copper sample (more…)

Goal:
Determine the detection limits for chlorine in bleach (more…)

Goal:
Identify elements present in alloy beads using LIBS. (more…)

Goal:
Evaluate the performance of the HR2000 spectrometer for the LIBS detection of lanthanum on stainless steel and aluminum (more…)

Goal:
To assess the discrimination capabilities of LIBS for different layers in a glued wood composite (more…)

Goal:
Assess the ability of LIBS to detect dirt in steel samples (more…)

Goal:
Determine the sensitivity of LIBS for the detection of silicone release reagent contamination on commercial airplane coupons (more…)